AC Supply and Installation

The AC systems we supply and install

Every space has a system that suits it, so we work across all the common types rather than pushing one solution everywhere. We help you compare the available brands on budget, running requirements and spare-parts availability, whether the project is a house, villa, apartment, shop, showroom, hotel or shopping centre.

• Wall split units for rooms, offices and small spaces
• Window units for simple jobs and openings already prepared for them
• Concealed ducted split units above false ceilings in villas and offices
• Ceiling cassettes for showrooms, shops and open halls
• Package units and central systems for commercial buildings and large areas

How we choose the right type and capacity

Sizing an AC by guesswork usually ends in one of two problems: a unit too small that runs flat out and still cannot keep up in a Riyadh summer, or one too large that switches on and off in short cycles, using more power and doing a poor job of removing humidity. That is why we visit the site and look at what actually drives the cooling load before we recommend anything.

For larger projects or those with special requirements, we prepare a system study and design before work starts, showing the unit layout, pipe routes and outdoor unit locations.

• Floor area, ceiling height and how the space is used
• Typical occupancy, plus heat from equipment and lighting
• Sun exposure on walls and glazed frontages
• Ceiling type: exposed concrete or a false ceiling that can hide units
• Space available for outdoor units and the drain route

Installation steps, from site to handover

Once the system is approved, we supply the units and prepare their positions, then run correctly sized, insulated copper lines, drain lines laid to a proper fall, and the electrical connections the system needs. We pressure-test the circuit and pull a vacuum to remove air and moisture before opening the refrigerant valves, then start the system, measure its performance and check the controls and drainage.

We position outdoor units where they get enough airflow, away from direct sun and trapped heat where possible, and where they can be reached for servicing, mounting them on suitable bases or brackets that limit vibration and noise.

At handover we walk you through the controls, sensible settings and when the filters need cleaning, and we remain available for technical support and after-sales service.